Labconco Protector Premier 10040 Series User Manual

Product Service 1-800-522-7658
31
Original instructions
CHAPTER 7
MODIFYING YOUR PROTECTOR
PREMIER
There are several ways to modify the fume hood for your individual requirements.
These include the addition of work surfaces, service fixtures, air monitor,
distillation grids, electrical duplex outlets, ceiling enclosures, and rear panels.
Installing Work Surfaces
Your Protector Fume Hood requires a work surface to work properly. Contact
Labconco Customer Service for ordering information.
Figure 7-1

Labconco Protector Premier 10040 Series Specifications

General

Brand	Labconco
Model	Protector Premier 10040 Series
Category	Laboratory Equipment
Language	English