Labconco SteamScrubber 44003 Series User Manual

Chapter 3: Getting Started
Product Service 1-800-522-7658
10
Leveling the Washer
If you have a Freestanding model of the SteamScrubber or FlaskScrubber
Glassware Washer, after you have installed the leveling feet, level the washer by
adjusting the leveling feet.
1. Position the washer in its final installed location.
2. Place a carpenter level on the washer in the positions shown.
3. Turn the four leveling feet, as needed, to level the washer.

Labconco SteamScrubber 44003 Series Specifications

General

Brand	Labconco
Model	SteamScrubber 44003 Series
Category	Laboratory Equipment
Language	English