Labconco SteamScrubber 44003 Series - APPENDIX C: GLASSWARE WASHER SPECIFICATIONS; Glassware Washer Specifications; Electrical Specifications

Product Service 1-800-522-7658 61
A
A
P
P
P
P
E
E
N
N
D
D
I
I
X
X
C
C
G
G
L
L
A
A
S
S
S
S
W
W
A
A
R
R
E
E
W
W
A
A
S
S
H
H
E
E
R
R
S
S
P
P
E
E
C
C
I
I
F
F
I
I
C
C
A
A
T
T
I
I
O
O
N
N
S
S
This Appendix contains various specifications for the Glassware Washer,
including program times and water consumption for both the 115V and 230V
models.
• Minimum fill water temperature: 120°F (49°C) recommended
• Water consumption per fill: 3.4 gallons (13 liters)
• Minimum feed water pressure: 20 psi (138 kPa)
• Maximum feed water pressure: 120 psi (827 kPa)
• Minimum purified water feed pressure: 0 psi (0 kPa)
• Heat rejected from washer: less than 104 BTU/minute (115V models);
less than 170 BTU/minute (230V models)
• Water heating rate: 1.6°F/minute (0.9°C/minute) 115V models
operating on 115V; 2.2°F/minute (1.2°C/minute) 230V models
operating on 208V
• Operating voltage for 115V washers: 104/127V
• Operating voltage for 230V washers: 207/253V
• Maximum amperage for 115 volt washers: 16.0 amperes
• Maximum amperage for 230 volt washers: 12.0 amperes
• Frequency 115 volt washers: 60 Hz
• Frequency 230 volt washers: 50/60 Hz
• Phase: Single
• Sump element power: 1,200 watts (115V models); 2,000 watts (230V
models)
Glassware Washer Specifications
Electrical Specifications