Appendix C: Glassware Washer Specifications
Product Service 1-800-522-7658
64
Program Times & Water Consumption (115V Models)
Factory Program Descriptions and Possible User Modifications- 115V Models
Rinse Only Plastic Glass Glass Plus Science
Units Factory User set Factory User set Factory User set Factory User set Factory User set
Delayed Start (hours) 0 1 to 8 0 0 to 8 0 0 to 8 0 0 to 8 0 0 to 8
Wash 1 Time (minutes) 0 None 5 None 5 None 5 None
Steam No None No Yes / No Yes Yes / No No Yes / No
Wash 2 Time (minutes) 10 1 to 40 10 1 to 40 10 1 to 40 20 1 to 40
Wash 2 Temp (°F) 122 100 to 140 140 100 to 180 140 100 to 180 158 100 to 180
(°C) 50 38-60 60 38-82 60 38-82 70 38-82
Number of Rinses 1 0 to 6 2 0 to 6 3 0 to 6 3 0 to 6 4 0 to 6
No of Pure Rinses 0 0 to 6 0 0 to 6 0 0 to 6 0 0 to 6 0 0 to 6
Rinse Time (minutes) 4 None 4 None 4 None 4 None 4 None
Final Rinse Temp (°F) 100 100 to 140 122 100 to 140 140 100 to 180 140 100 to 180 140 100 to 180
(°C) 38 38 to 60 50 38 to 60 60 38 to 82 60 38 to 82 60 38 to 82
Dry Time (minutes) 0 0 or 15 to 250 15 0 or 15 to 250 30 0 or 15 to 250 30 0 or 15 to 250 40 0 or 15 to 250
Dry Temp (°F) 100 100 to 140 122 100 to 140 140 100 to 158 140 100 to 158 140 100 to 158
(°C) 38 38 to 60 50 38 to 60 60 38 to 70 60 38 to 70 60 38 to 70
Total Water
Consumption (gallons)
3.4
3.4 to 20.4
13.6
6.8 to 27.2
17.0
6.8 to 27.2
17.0
6.8 to 27.2
20.4
6.8 to 27.2
(liters)
12.9
12.9 to 77.2
51.5
25.7 to 103.0
64.4
25.7 to 103.0
64.4
25.7 to 103.0
77.2
25.7 to 103.0
Total Wash Time
(Excluding delays for
heating water and
dry time) (min)
10 51 86 96 116
Note
Times shown are for tap water rinses. Pure rinses add 1.5 minutes per rinse.
Additional time is required to allow inlet water to heat up to the set temperature.
Steam adds 10 minutes to the total program time.
To Next Page
Loading...
