M
N
O
Check manual release operation, when the handle is in locked
position, the electric lock must operate normally.
When the handle is in released position, the electric lock must
remain open and release the leaves.
Cut the excess steel cable from the release anchor.
NOTE:
In case of FAIL SECURE electric lock, by releasing the release, the electric lock will close.
In case of a bistable electric lock, by releasing the release, it will open.
In case it is necessary to manually close the door with a bistable electric lock, it will be sufficient to lift the core of the secondary solenoid
with a screwdriver.
18
To Next Page
Loading...
