EasyManua.ls Logo

Label ETERNA 90 - Declaration of Incorporation; Compliance with European Directives

Label ETERNA 90
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Manufacturer: Label S.p.A.
Address: Via Ilariuzzi 17/A - 43126 San Pancrazio Parmense, PARMA - ITALIA
Declares that: the operator mod. ETERNA 90 (type ET-90S, ET-90D)
Serial number:
realized to control pedestrian automatic sliding doors
complies with the essential safety requirements of the following directives:
! Low Voltage Directive LVD 2014/35/UE
! Electromagnetic Compatibility Directive EMC 2014/30/UE
Label declares that the operator ETERNA90 has been realized to be incorporated in a machine or to be
assembled with other devices to constitute a machine covered by Machine Directive 2006/42/EC.
Applicable harmonised European directives:
EN 13849-1
EN 13849-2 (operator in category 2, PL = d)
EN 61000-6-2
EN 61000-6-3
EN 60335-1
EN16005
Label declare as well that the product cannot be operated until the final machine, where the product is
incorporated, has been certified as compliant with the Machine Directive 2006/42/EC.
Label undertake to submit, upon suitably justified request of the national authorities, information related to
the partly completed machinery.
PERSON AUTHORIZED TO ESTABLISH THE TECHNICAL DOCUMENTATION:
Bruno Baron Toaldo
Via Ilariuzzi, 17/A
43126 - San Pancrazio P.se - Parma
Parma, 24/07/2018
The Chairman
Bruno Baron Toaldo
DECLARATION OF INCORPORATION OF PARTLY ASSEMBLED MACHINERY
LABEL S.p.A.
Via Ilariuzzi, 17/A - S. Pancrazio P.se - 43126 - PARMA - Italy
Tel. (+39) 0521/6752 - Fax (+39) 0521/675222
www.labelspa.com

Table of Contents

Related product manuals