48
22.4) ENABLING USER PASSWORD USAGE (primary and service)
Ÿ Select “PASSWORD ON / OFF”
Ÿ Press OK (F1) button.
Ÿ Press the ON button to enable the usage of user passwords and return to the PASSWORD MANAGEMENT menu.
To return to the work program view press the EXIT button twice.
Ÿ From this moment on, whenever the user wants to access to ET-DSEL digital programmer to change the automatic door work program,
the primary or service password must be typed.
When the user decides to enable the password usage, it is recommended to change the combination of both primary and
service password.
22.5) DISABLING USER PASSWORD USAGE
Ÿ From the PASSWORD MANAGEMENT section, select “PASSWORD ON / OFF”
Ÿ Press OK (F1) button.
Ÿ Press OFF (F1) button to disable user password usage. To return to the general programming menu press the EXIT button twice.
From this moment on, the access to ET-DSEL digital programmer like program selector is free.
Ÿ Type the primary password.
Ÿ Type the primary password.
To Next Page
Loading...
