Label ETERNA 90 - Technical Drawings for Automation Configuration; Component Arrangement Drawings

7
RIGHT OPENING SINGLE LEAF WITHOUT ELECTRIC LOCK
LC = BELT LENGTH
LC = (F-M+80)x2
M = MOTOR PULLEY
LT-LM-250
F = IDLE PULLEY
LT-120
LM = LEAF WIDTH
LM = (LT-B+S)/2-10
PL = FREE PASSAGE
PL = (LT+B-S)/2-10
LT = TRANSOM
LENGTH
LT = 2PL-B+S+20
LEFT OPENING SINGLE LEAF WITHOUT ELECTRIC LOCK
4 - TECHNICAL DRAWINGS - COMPONENT ARRANGEMENT
DOUBLE DOOR LEAF WITHOUT ELECTRIC LOCK
LC = BELT LENGTH
LC = (F-M+80)x2
M = MOTOR PULLEY
M = LT*1/4-80
F = IDLE PULLEY
LT*3/4+250
LM = LEAF WIDTH
LM = (LT-B)/4+S/2-10
PL = FREE PASSAGE
PL = (LT+B)/2-S-10
LT = TRANSOM
LENGTH
LT = 2PL-B+2S+20
LC = BELT LENGTH
LC = (F-M+80)x2
M = MOTOR PULLEY
LT-LM-250
F = IDLE PULLEY
LT-120
LM = LEAF WIDTH
LM = (LT-B+S)/2-10
PL = FREE PASSAGE
PL = (LT+B-S)/2-10
LT = TRANSOM
LENGTH
LT = 2PL-B+S+20
F
M
F
M
F
M
LEGEND:
LT = AUTOMATION LENGTH
PL = FREE PASSAGE
LM = LEAF WIDTH
B = FINAL LEDGES
S = LEAF OVERLAPPING
S
S
B
LM
LM
PL
LT
S
LT
PL
B
LM
S
LT
PL
B
LM