51
MEANING
It identifies the ET-LOGIC-B control unit serial code.
It displays the software release of the ET-LOGIC-B control unit A microcontroller.
It displays the software release of the ET-LOGIC-B control unit B microcontroller.
Identification number including data for manufacturer use
INFORMATION AREA
NUMBER
I1
I2
I3
I4
I5
I6
INFORMATION
Serial number
Partial counter
Total cycles
A microcontroller version
B microcontroller version
Identification number
It displays the door opening/closing cycles which have been carried out since the latest maintenance intervention. This counter
must be reset by the person in charge of maintenance after each intervention (please refer to the "Maintenance" paragraph).
It displays the door opening/closing cycles which have been carried out since the first start-up of the operator.
Refer to the following tables for the list of information and error messages.
The events memory stores the last 5 error messages in chronological order.
When all the 5 memory cells are full of messages, the following event stored shall be located in E1 cell, the other memory events are
shifted by one position and the event in E5 cell shall be deleted.
The events memory stores messages, divided into warnings and errors.
Stored errors are signalled by displaying the symbol directly from the main screen of the work program; access the events
memory to show the relevant message.
The warnings stored are not shown in the main screen of work program, but only stored in events memory.
To Next Page
Loading...
