Lafayette VENUS - Asq 4; MR (Memory Recall) 4

ENG
24
9 (EMG 9)
The EMG (Emergency) button is for instant access
to international Calling & Emergency channel 9,
which is monitored by all truckers and many CB
users and in some regions even by road safety
organizations. if you need any help or assistance,
it is a good iead to call on this channel 9.
Truckers can be reached in most cases in AM
mode. The emergency channel is also used on
the German highways as warning system in case
of accidents, road maintenance or serious traffic jams with collision danger, if you pass a spe-
cial beacon on your lane and a dangerous situation may be in front of you, you will be warned
by alarm tones and voice announcement. With the EMG key you can toggle between CH9 and
your previously used channel.
The other, often used calling channel is Channel 19, if you want to use CH19, please 2 second
press 9/SHT button.
ASQ
As already mentioned in the squelch chapter, the
ASQ is a feature that allows the radio to receive
an incoming signal which is stronger than the
surrounding noise level. This automatic switch-
ing function does not need any adjustment and
works fully automatic. It opens at any signal
which is good enough to be understood.
The sensitivity of the ASQ system is very good.
It can even open at signal strengths below the
nominal maximum usable sensitivity. The only criterion is the reduction of noise on the receiving
channel. However, the ASQ function is limited to normal receiving condition on the CB band.
During periods of strong over-range wave propagation, strong sun-spot activates and may be
heard. In such cases it may be better to use the standard squelch instead of the ASQ.
MR (Memory Recall)
To access memorized channels simply press the
“MR/DX” button and choose
the desired memory channel from M1 to M4 by
pressing on of buttons F/AF to ASQ/CT.
19
Primary function
•
To start scanning turn on the power first and adjust the volume and
squelch.
•
Press the SCAN Button to start scanning. The word “OS” will appear in the
LCD.
•
Display and the unit will start scanning.
•
If you want to stop scanning you can pusht the scan button again or press
the push to talk switch.
This will shut off the scanning function and transmit on that channel.
9 (EMG 9)
The EMG (Emergency) button is for instant access to international Calling &
Emergency channel 9, which is monitored by all truckers and many CB users
and in some regions even by road safety organizations. if you need any help
or assistance, it is a good iead to call on this channel 9.
Truckers can be reached in most cases in AM mode.
The emergency channel is also used on the German highways as warning
system in case of accidents, road maintenance or serious traffic jams with
collision danger, if you pass a special beacon on your lane and a dangerous
situation may be in front of you, you will be warned by alarm tones and voice
announcement.
With the EMG key you can toggle between CH9 and your previously used
channel.
The other, often used calling channel is Channel 19. if you want to use CH19,
Please 2 second press 9/SHT button.
20
Primary function
ASQ
As already mentioned in the squelch chapter, the ASQ is a feature that
allows the radio to receive an incoming signal which is stronger than the
surrounding noise level.
This automatic switching function does not need any adjustment and works
fully automatic.
It opens at any signal which is good enough to be understood.
The sensitivity of the ASQ system is very good. It can even open at signal
strengths below the nominal maximum usable sensitivity. The only criterion
is the reduction of noise on the receiving channel. However, the ASQ function
is limited to normal receiving condition on the CB band. During periods of
strong over-range wave propagation, strong sun-spot activates and may be
heard. In such cases it may be better to use the standard squelch instead of
the ASQ.
MR(Memory Recall)
To access memorized channels simply press the “MR/DX” button and choose
the desired memory channel from M1 to M4 by pressing on of buttons F/AF
to ASQ/CT.
20
Primary function
ASQ
As already mentioned in the squelch chapter, the ASQ is a feature that
allows the radio to receive an incoming signal which is stronger than the
surrounding noise level.
This automatic switching function does not need any adjustment and works
fully automatic.
It opens at any signal which is good enough to be understood.
The sensitivity of the ASQ system is very good. It can even open at signal
strengths below the nominal maximum usable sensitivity. The only criterion
is the reduction of noise on the receiving channel. However, the ASQ function
is limited to normal receiving condition on the CB band. During periods of
strong over-range wave propagation, strong sun-spot activates and may be
heard. In such cases it may be better to use the standard squelch instead of
the ASQ.
MR(Memory Recall)
To access memorized channels simply press the “MR/DX” button and choose
the desired memory channel from M1 to M4 by pressing on of buttons F/AF
to ASQ/CT.