EasyManua.ls Logo

Lance 1130 - Page 93

Default Icon
132 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
93
Grab the tent flap along the bed door and pull it over
the edge of the door. From the inside of the tent,
disconnect the over-center lever arms on each side of
the bed door, insert into the tent bows and lock into
position.
Unfold the mattress onto the bed door.
To fold-up the tent, reverse the above procedure.
Make sure that the tent fabric is tucked in around the
sides of the tent door before latching the bar locks.
WARNING
KEEP ALL FLAME AND HEAT SOURCES
AWAY FROM THE TENT FABRIC.
The tent is made with flame-resistant fabric that meets
CPAI-84 specifications. It is not fireproof. The fabric
will burn if left in continuous contact with any flame
source. The application of any foreign substance to
the tent fabric may render the flame resistant proper-
ties ineffective.
Insure that the light for the tent room is turned off.
Heat from the light can damage the tent fabric and
possibly cause a fire.
WARNING
DO NOT OPERATE ANY DEVICE THAT
BURNS FUEL INSIDE THIS TENT.
Combustion consumes oxygen and can produce
dangerous levels of carbon monoxide which can lead
to serious injury or death.
Never place a flame source in or near your tent.
Maintain adequate ventilation inside your tent at all
times. Death by suffocation and/or serious burns are
possible.
When setting up your trailer in a campsite, carefully
consider the possibility of potential hazards such as
tree limbs and strong winds to reduce the risk of loss
or injury to the tent or occupants.

Table of Contents

Related product manuals