3
3.22 BIB PUMP OPERATING, BUT NO FLOW..........................................................................19
3.23 BIB PUMP CONTINUES TO OPERATE WHEN BAG IS EMPTY.......................................19
3.24 BIB PUMP FAILS TO RESTART AFTER BAG REPLACEMENT........................................19
3.25 BIB PUMP FAILS TO STOP WHEN DISPENSING VALVE IS CLOSED............................19
3.26 LOW OR NO CARBONATION............................................................................................19
4. LIGHT EMITTING DIODES (LEDS)............................................................................................20
5. AUTOMATIC AGITATION AND LOW ICE ALARM CONTROL.............................................20-21
6. ILLUSTRATIONS AND PARTS LISTINGS ................................................................................22
6.1 DECALS AND LABELS..................................................................................................22-23
6.2 FINAL ASSEMBLY, POST-MIX IBD AND ICE DISPENSER..........................................24-25
6.3 FAUCET PLATE AND ICE CHUTE SUB-ASSEMBLY, POST-MIX................................26-27
6.4 ELECTRICAL BOX AND GEAR MOTOR SUB-ASSEMBLY, POST-MIX.......................28-29
6.5 WIRING DIAGRAM - 115V/60HZ........................................................................................30
6.6 AGITATION - CONTROLS, EXPANDED VIEW..................................................................31
7. DISPENSER DISPOSAL.............................................................................................................31
To Next Page
Loading...
