LANCOM Wireless DSL – LANCOM Wireless ADSL
Chapter 3: Basic configuration
42
EN
The MAC address can be found on a label at the bottom of the device.
If there is no DNS server in the LAN, or it is not linked to the DHCP server,
then the device can not be reached by the name. The following options
remain in this case:
Figure out the DHCP-assigned IP address of the LANCOM by suitable
tools and contact the device directly with this IP address.
Use LANconfig.
Connect a PC with a terminal program via the serial configuration
interface to the device.
Starting the wizards in WEBconfig
햲 Start your web browser (e.g. Internet Explorer, Netscape Navigator,
Opera) and call the LANCOM Wireless DSL there:
http://<IP address of the LANCOM>
(or with a name as discribed above)
If you cannot access an unconfigured LANCOM Wireless DSL, the
problem may be due to the netmask of the LAN: with less than 254
possible hosts (netmask > '255.255.255.0'), please ensure that the IP
address 'x.x.x.254' is located in your own subnet.
The WEBconfig main menu will be displayed:
To Next Page
Loading...
