LANCOM GS-1224
쮿 Chapter 4: Operation of Web- based Management
21
EN
쮿 Hardware Version:
The hardware version of this switch.
쮿 MAC Address:
It is the Ethernet MAC address of the management agent in this switch.
쮿 Serial Number:
The serial number is assigned by the manufacturer.
쮿 Active IP Address:
Shows the active IP address of this switch.
쮿 Active Subnet Mask:
Shows the active subnet mask of this switch.
쮿 Active Gateway:
Shows the active gateway of this switch.
쮿 DHCP Server:
Shows the IP address of the DHCP server.
쮿 Lease Time Left:
Show the lease time left of DHCP client.
쮿 Device Name:
Set a special name for this switch. Up to 16 characters are allowed in this
parameter. Any alphanumeric character and zero is acceptable.
Default: no default
쮿 DHCP Enabled:
You can enable the automatic delivery of an IP address and activate
further adress information via DHCP.
Default: enabled
쮿 Fallback IP Address:
Fill in an IP address, which is used by the device, if DHCP is disabled or
the DHCP server is not accessible.
Default: 172.23.56.250
쮿 Fallback Subnet Mask:
Fill in a subnet mask, which is used by the device, if DHCP is disabled or
the DHCP server is not accessible.
Default: 255.255.255.0
To Next Page
Loading...
