Lancom GS-1224 - IGMP Snooping

LANCOM GS-1224
쮿 Chapter 4: Operation of Web- based Management
43
EN
Parameter:
쮿 Reauthentication Enabled:
Choose whether regular authentication will take place in this port.
Default: Disable
쮿 Reauthentication Period (1-65535 s):
You can define the time period (in seconds), after a supplicant has to
authenticate again. The time period can not be zero.
Default: 3600 seconds
쮿 EAP timeout (1-255 s):
A timeout condition in the exchange between the authenticator and the
supplicant. The valid range: 1 -255.
Default: 30 seconds
4.2.9 IGMP Snooping
IGMP Snooping lets administrators configure a switch to constrain multicast
traffic on certain ports.
Parameter:
쮿 IGMP Enabled:
Here you can enable general the IGMP function.
Default: disable
쮿 Router Ports:
A Port is router port, if a router is connected, which handle multicast rou-
ting. Enable here the corresponding ports.
Default: none