LANCOM GS-1224
쮿 Chapter 4: Operation of Web- based Management
48
EN
4.2.12 Filter
The filter configuration lets administrators assign certain IP addresses or sub-
nets to ports on the switch, from which a login on the switch for configuration
is allowed.
Parameter:
쮿 Source IP Filter:
왏 Mode:
There are three types of mode in this drop-down menu.
Default:disabled.
Disabled:
Allow all IP Address login to this switch and manage it.
Static:
Just allow the IP Address which set by administrator to login to
this switch and manage it..
DHCP:
Allow the IP Address get from DHCP server can login to this switch
and manage it.
Note: If you choose this mode only an DHCP client could be
package forwarding on the port.
왏 IP Address:
Setting up the IP Address, it can be one IP Address or a LAN.
왏 IP Mask:
Setting up the IP Subnet Mask related with the IP Address.
쮿 DHCP Server Allowed:
Just tick the check box under the port x to allow the DHCP Server on this
port.
To Next Page
Loading...
