Lancom GS-1224 - Mirror Configuration for Traffic Monitoring; QoS (Quality of Service) Configuration

LANCOM GS-1224
쮿 Chapter 4: Operation of Web- based Management
44
EN
쮿 Unregistered IGMP Flooding enabled:
Allows multicat flooding, while the multicast traffic is not registered in the
multicast table.
Default: enable
쮿 VLAN ID:
At the IGMP Enable mode being selected, it will list the VLAN ID number.
쮿 IGMP Snooping Enabled:
If this function is enabled, the switch can handle IGMP-requests in the
network and learns if necessary the membership of certain multicast
groups.
Default: enable
쮿 IGMP Querying Enabled:
If this function is enabled, the switch can distribute IGMP-requests in the
network.
Default: enable
4.2.10 Mirror Configuration
Mirror Configuration is provided to monitor the traffic in the network. This
switch supports one-port mirror multi-ports. For example, we assume that
Port A and Port B are Source Ports, and Port C is Mirror Port respectively, thus,
the traffic passing through Port A and Port B will be copied to Port C for moni-
tor purpose.
Parameter: