EasyManua.ls Logo

Lancom GS-1224 - Port Configuration Settings

Lancom GS-1224
66 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
LANCOM GS-1224
쮿 Chapter 4: Operation of Web- based Management
22
EN
쮿 Fallback Gateway:
Fill in a gateway, which is used by the device, if DHCP is disabled or the
DHCP server is not accessible.
Default: 172.23.56.254
쮿 Management VLAN:
Shows the ID of the management VLAN.
쮿 Password:
Set a password for this switch. Up to 16 characters are allowed in this
parameter. Any alphanumeric character is acceptable.
Default: admin
쮿 Inactivity Timeout(secs):
Set the auto-logout timer. The valid value is 0-60 in the unit of minute and
a decimal point is not allowed. The value 0 means auto-logout timer is
disabled.
Default: 0
4.2.2 Port Configuration
Here you can configure the individual ports.

Related product manuals