Lancom GS-1224 - Configuration; System Configuration

LANCOM GS-1224
쮿 Chapter 4: Operation of Web- based Management
20
EN
4.2 Configuration
Configuration includes the following functions: System Configuration, Ports
Configuration, VLAN Mode Configuration, VLAN Group Configuration, Aggre-
gation, LACP, RSTP, 802.1X, IGMP Snooping, Mirror, QoS, Filter, Rate Limit,
Storm Control and SNMP.
4.2.1 System Configuration
In the system configuration you can define the basic parameter for the confi-
guration and the operation of the device. The switch supports manual IP
address setting and further address information via DHCP or the manual set-
ting of a fixed IP address.
Parameter:
쮿 System Description:
The simple description of this switch. Please do not use blanks.
쮿 Firmware Version:
The firmware version of this switch.