TCP/IP Configuration
4 - 5
administrator to Telnet into the MPS. Once logged in, the administrator can enter the
Change IPaddress
command to make the address permanent.
Any host wishing to access the MPS will have to be told the MPSÕs IP address. This is
typically conÞgured in the unix Þle
/etc/hosts
or via a nameserver. Refer to the hostÕs
documentation for additional information.
% telnet 192.0.1.228
Trying 192.0.1.228
Lantronix Version n.n/n (yymmdd)
Type Help at the ‘Local_>’ prompt for assistance.
Enter Username> gopher
Local> SET PRIVILEGED
Password> system (not echoed)
Local>> DEFINE IPADDRESS 192.0.1.228
To Next Page
Loading...
