Lantronix MPS100 Installation Guide

NetWare Configuration
5 - 3
NOTE: For an explanation of the structure of the NetWare Directory Service
tree, see your host documentation.
3. DeÞne the directory service context in which the Server is located.
4. Enter the List Protocol NetWare Access command to ensure that at least one of
the Þle servers in the directory service tree is in the access list.
5. If desired Þle server is not in the access list, add it.
6. Reboot the MPS.
Local>> DEFINE PROTOCOL NETWARE DSCONTEXT ou=kiwi.ou=exotic.o=fruit
Local>> DEFINE PROTOCOL NETWARE ACCESS fileserver
Local>> INITIALIZE DELAY 0

Lantronix MPS100 Specifications

General

Brand	Lantronix
Model	MPS100
Category	Print Server
Language	English