LAT Configuration
6 - 2
2. Create and start a print queue that uses the LAT application port.
3. Add the commands to the SYS$MANAGER:LAT$STARTUP.COM Þle so the
required LAT devices will be recreated after each host reboot.
NOTE: LAT terminal device characteristics may have to be changed to correctly
print certain files. See your VMS documentation for more information.
4. Print to the queue.
$ INITIALIZE/QUEUE/START/ON=LTAnnn:/PROCESSOR=LATSYM
/RETAIN=ERROR queue_name
$ PRINT/QUEUE=queue_name filename.txt
To Next Page
Loading...
