Version on FRAME
Ediz. 010 - 06/2015
PREPARATION OF THE PAINT
• Make sure the product is suitable to be used with a spray
gun.
• Mix and filter the product before using it. For filtration,
use CLOSE-MESH (ref. 214) and LARGE-MESH (ref.215)
LARIUS METEX braids.
G
Never use products containing halogen hydrocarbons (as
methylene chloride). If these products come into contact with
aluminium parts of the equipment, they can cause dangerous
chemical reactions with risk of explosion.
Make sure the product to be used is compatible
with the materials employed for manufacturing the
equipment (stainless steel and aluminium).
For further information, please contact the supplier
of the product.
OPERATION
START OF THE PAINTING OPERATIONS
• Use the equipment only after performing all the SETTING
UP operations described above.
• Dip the suction pipe (G1) into the product tank.
www.larius.eu
JOLLY
12
Version on TROLLEY
G1
To Next Page
Loading...
