Lars Thrane Iridium Certus LT-4100 User Manual

LT-4100 User & Installation Manual Rev 1.00 Web server
Lars Thrane A/S www.thrane.eu Page 91 of 129
Static
The Static mode must be used when the IP address of the LT-4110 Control Unit must never change.
Typically used, if connecting the LT-4110 Control Unit to an IP network, where a DHCP server is already
available, and where it is important that the IP address assigned for the LT-4110 Control Unit is never
changed. The web server static setting is illustrated in Figure 113.
NOTE: If the user changes DNS all clients’ needs to be rebooted as changes does not apply
automatically
Figure 113: Web server – Network (Static mode)

Lars Thrane Iridium Certus LT-4100 Specifications

General

Brand	Lars Thrane
Model	Iridium Certus LT-4100
Category	Conference System
Language	English