Lars Thrane Iridium Certus LT-4100 User Manual

LT-4100 User & Installation Manual Rev 1.00 Web server
Lars Thrane A/S www.thrane.eu Page 103 of 129
BAM
The LT-4100 system supports BAM via the LT-4110 Control Unit AUX (RS-422) The AUX connector is
described in detail in Auxiliary (AUX) on page 27. BAM must be enabled via the web server, under
Configuration – GNSS and BAM. The baud rate can be configured to 4.800, 9.600, or 38.400 baud. For BAM
configuration see Figure 127 below.
NOTE: The LT-4110 Control Unit AUX connector is providing one bi-directional RS-422 interface.
The Supported BAM sentences are described in BAM sentences on page 82.
Figure 127: Web server (BAM configuration)

Lars Thrane Iridium Certus LT-4100 Specifications

General

Brand	Lars Thrane
Model	Iridium Certus LT-4100
Category	Conference System
Language	English