43
Fig. 11
For example, to engrave stamps with L-25 (25Watt), depends on the
thickness of the rubber pad. 2~3mm rubber pad for instance, the ideal power
is 100% at speed around 7%. The pitch value varies depending on the size of
text; the bigger the letter is, the bigger the pitch value is required. With 1cm
size letter, for example, 0.1~0.3 pitch value is enough. It is hard to tell
exactly which model of LaserPro most suitable for making stamps. Of course
the higher the laser power is, the less time it takes to do the same job. It
really needs to see what thickness of the rubber you will engrave on and the
letter size you use for most applications. The bigger the pitch value is, the
longer time computer will take to process.
#
Image Invert
Reverse the black and white image. Remain the characters but engraving the
rest areas of rubber stamps. This function is disable under the Manual color
fill mode.
#
Image Mirror
Reverse the left and right side as a mirror image.
#
Without Vector
Output without vector data.
#
Power Level of Stamp Mode
This function is to adjust the power distribution of the slope shoulder to get
the better shape of stamp’s vertical profile. Select “set shoulder” in the page
To Next Page
Loading...