21
LSI 090 - Rev. 00 - Ed. 04/2018
7. OPTIONAL
7.1 ELECTRIC CUP WARMER
The appliances can also be equipped with an electric cup warmer (as optional) for an additional cup heating.
The corresponding led (2 - Fig. 5), on the control panel, lights on.
Press the same button to switch it off.
7.2 INDIVIDUAL TEMPERATURE CONTROL - I.T.C.
This system makes it possible to set a different coffee brewing temperature for each
delivery group.
The temperature of each group is independent from the temperature set in the
boiler.
To vary the temperature on a group, use the corresponding regulator alongside the
group itself, which can be reached through the opening in the top of the upper cup grid
(Fig. 9). Turn the adjustment screw anticlockwise to decrease the temperature. Turn
the adjustment screw clockwise to increase the temperature.
Temperature
regulator
Fig. 9
Take note!
Every full turn of the adjustment screw corresponds to a change of approximately 2 °C. Changes must only be made to adapt the
temperature of the delivery group to the coffee blend being used, so as to improve the result in the cup.
To Next Page
Loading...
