Lauda RP 890 - Submenu Lmdkt (Master): Branching to Further Submenus

Proline Low-temperature Thermostats
YACE0072 / 21.08.07 Starting up 37
7.6.2 Submenu LMDkt (Master): Branching to further submenus
Further settings
LMDkt
°C
Control parameters
O0c--
°C
Device parameters
O@pA-
°C
End
Dlc
°C
⇒ Section 7.6.5 / 7.6.6
⇒ Section 7.6.4
Parameters for internal
controller (bath controller) &
external controller: Xp, Tn.
Depending on the selected control
variable only internal or external
parameters are offered.
Calibrate temp. probe
B@K--
°C
Show values
RgmY[
°C
Reduce current consumpt.,
resolution, start after mains
fail, works settings, sounds,
device type.
Show various device values:
Software version, serial no.,
internal device
measurements, etc.
⇒ Section 7.6.8
Calibrate internal/ external
Pt100 measuring chain,
restore works settings.
⇒ Section 7.6.7
Through-flow cooler
rEB /
°C
Valid for through-flow
coolers DLK 10 and DLK 25.
rEB / = DLK ON
rEB 0 = DLK OFF.