Lauda RP 890 - Restoring the Works Setting of the External Temperature-Probe Offset

Proline Low-temperature Thermostats
YACE0072 / 21.08.07 Starting up 71
7.8.10 Restoring the works setting of the external temperature-probe offset
If the offset has been misadjusted unintentionally, the works setting can be restored with this function.
Master
cDE D
3x to LMDls
2x
to B@K-- 3x
− Call the offset works setting for the external temperature probe
cDE D .
− Continue as described in Ì 7.8.8 for the internal temperature
probe.
Command
Default
− Open the device parameter menu via the
soft key Menu .
− With the cursor keys continue to
Æ Settings Æ Calibration Æ
extern Pt100 Æ Default .
− The adjacent window appears.
− Confirm selection with .
− Continue as described in 7.8.8 for the
internal temperature probe.
Hel
p
Menu End T
set
T
fix
intern Pt100
extern Pt100
Calibration
Default