LAUNCH TECH X-431 V+ - Email Management; 5.1.1 Configure an email account; 5.1.2 Send a email; 5.1.3 View a email

LAUNCH X-431 V+ User’s Manual — Others
40
5 Others
5.1 Email
The function allows you to send and receive email. You can add POP3 or IMAP
email account for some common web email service provider.
5.1.1 Configure an email account
Note: Before sending or receiving email, you have to set up an email
account. In addition, this function required a stable network connection.
1. On the desktop, tap
.
2. Choose the desired email account type.
3. Input email address and password, tap “Next” or “Manual setup”.
Note: If “Manual setup” is selected, please consult your email service
provider for detailed parameter setting.
4. Follow the on-screen instructions to proceed until the system prompts you
that the account setup has been finished.
5.1.2 Send a email
1. Enter main menu screen, and tap to enter account screen. If several
email accounts are configured, choose the desired one.
2. Tap
to enter new mail writing interface. Input the receiver address in
“To” field and a title in “Subject” column, and then type in the content in
“Compose” email area.
3. After inputting, tap
, you can perform any one of the followings: attach file,
add CC/BCC, save draft, discard and setting.
4. Tap
to send email.
5.1.3 View a email
1. Enter main menu screen, and tap to enter account screen.
2. Tap the desired email account.
3. Tap the desired one to read:
a) Tap
to reply it.