LAUNCH X-431 V+ User’s Manual — Safety Precautions
iii
on. High voltage transients may encounter at the moment of disconnecting,
which may damage the sensors and the ECU.
z Protect the computer from magnetic object.
z Do cut off the power supply of ECU system before welding on the vehicle.
z Pay more attention to the ECU and the sensors when the operation is next
to them.
z Ground yourself when you disassemble PROM, otherwise ECU and
sensors will be damaged by static electricity.
z Do connect ECU harness connector firmly, otherwise electronic elements,
such as IC inside ECU, will be damaged.
To Next Page
Loading...
