20
LAUNCH
7. On-board monitor test
This function retrieves test results for emission-related powertrain components
and systems that are not continuously monitored. The test’s availability is
determined by the vehicle manufacturer.
8. EVAP System Test
This function lets you initiate a leak test for the vehicle’s EVAP system. Refer to
the vehicle’s service repair manual to determine the procedures necessary to
stop the test.
9. Vehicle Info
This function retrieves a list of information (provided by the vehicle manufacturer)
from the vehicle’s on-board computer.
This information may include:
• VIN (Vehicle identication Number).
• CID (Calibration ID).
• CVN (Calibration Verication Number).
4.4 History
Generally once a vehicle diagnosis is performed, the tool will record the every
details of diagnostic session.
The History function provides direct access to the previously tested vehicles and
users can resume from the last operation, without starting from scratch.
Tap “History” on the Diagnose main menu screen, all diagnostic records will be
listed on the screen in date sequence.
To Next Page
Loading...
