12
LAUNCH
Input the VIN, and tap “OK”, the system will decode the VIN data
automatically, and continue the Smart Diagnosis procedure if success.
Otherwise the system will enter the Manual Diagnosis mode.
*Notes:
• The most recognizable location for this number is in the top left corner on the
vehicle’s dashboard. Other locations include the driver’s door or post, and the
rewall under the hood.
• In general, vehicle identification numbers are standardized - all contain 17
characters. VIN characters may be capital letters A through Z and numbers 1
through 0; however, the letters I, O and Q are never used in order to avoid mistakes
of misreading. No signs or spaces are allowed in the VIN.
4.2.2 Manual Diagnosis
If the tool cannot obtain or analyze the VIN information, you can also perform
Manual Diagnosis. In this mode, you need to execute the menu-driven command
and then follow the on-screen instruction to proceed.
*Notes:
• Before diagnosing, please make sure the corresponding vehicle manufacturer
software has been installed on the tool.
• The diagnostic menu may vary by the vehicle’s make, model and year.
Refer to the owchart illustrated as below to diagnose a vehicle manually:
To Next Page
Loading...
