Launch Creader V+ User Manual

LAUNCH Creader V+ User’s Manual
13
Figure 4-5
If there are some codes, the screen will display the codes as shown below:
Figure 4-6
1/39 indicates there are 39 codes total and now P0100 is the first code to
display.
The screen will also show the content of the code below the number of code.
You can use [
] key to view the next code.
After viewing all the codes, you can press [ ] to return to the Diagnostic Menu.
4.2.2 Erase Codes
Select [Erase Codes], the screen will display the interface as shown below:

Launch Creader V+ Specifications

General

Brand	Launch
Model	Creader V+
Category	Medical Equipment
Language	English