Launch Creader V+ - On-Board Monitor Test

LAUNCH Creader V+ User’s Manual
19
Figure 4-16
Select [O2 Sensor Test] in Diagnostic Menu and press [
] and the screen will
display as shown below:
Figure 4-17
You can use [
] [ ] button to select an item and press [ ], then follow the
on-screen instructions to perform the test.
Press [ ] to return to Diagnostic Menu.
4.2.7 On-board monitor test
This function can be utilized to read the results of on-board diagnostic
monitoring tests for specific components/systems.
Select [On-board Monitoring] in main menu and press [
] and the screen will
display as shown below: