Launch X-431 ADAS PRO - 3.6.1 Installing Attachment Bracket on Wheel Clamp

LAUNCH X-431 ADAS PRO Calibration Tool User Manual
17
Fig. 3-7
No.
Description
1
Attachment brackets for vehicle tyre
Attach it to the vehicle’s tyre.
2
Level gauge
3
Handle
4
Adjustment screw
Turning it can slide all attachment brackets (1) in (out) simultaneously.
5
Set screw
To fasten/loosen the laser module.
6
Cable pull switch
Use the finger to pull it, the attachment bracket (1) can be adjusted to
different position or detached from the wheel clamp.
7
Mounting slot for laser module
3.6.1 Installing the attachment bracket on the wheel clamp
1. Take out the attachment brackets (1) from the package box.
2. Follow the instructions in Fig. 3-8 to insert the attachment brackets into the wheel
clamp respectively, ensuring the left and right attachment brackets are installed into
the same depth.