LAUNCH X-431 ADAS PRO Calibration Tool User Manual
33
4.1.4 Installing the calibratioin reference pattern
Before calibrating, you need to install the vehicle-specific calibration pattern.
There are 4 mounting holes on the calibration frame. Align the calibration pattern with
the top horizontal holes of calibration frame.
*Note: The mounting holes vary by calibration patterns. No matter which pattern you
choose, try to keep the pattern in the center of the calibration frame.
Fig. 4-14
Fig. 4-15
4.2 Activate the Software Calibration Function
By default, the calibration feature of the pre-installed diagnostic software of LAUNCH
scanners is disabled. To ensure normal use of the calibration function of the diagnostic
To Next Page
Loading...
