X-431 ADAS PRO Calibration Tool User Manual
34
software, you need to activate the pin card to unlock the calibration function on the
LAUNCH scanner (sold separately) first.
Follow the steps below to activate it. Here we take X-431 PAD II for example to
demonstrate how to activate the ADAS function.
*Note: Different LAUNCH scanners have different accesses to the ADAS function.
1. Press the [POWER] button on the diagnostic tool to turn it on.
2. Tap the application icon on the home screen to launch it.
3. Log in the system, a screen similar to the following figure appears:
Fig. 4-16
4. Tap “ADAS”. If the ADAS is not activated, the following prompt window displays.
Fig. 4-17
5. Tap “Activate” to enter the ADAS activation screen.
To Next Page
Loading...
