Launch X-431 ADAS PRO - Page 23

LAUNCH X-431 ADAS PRO Calibration Tool User Manual
19
3. Use the set screw (5) to tighten it and follow Fig. 3-10a/3-10b to lay it aside or hang
it on the cross member.

Correct
Fig. 3-10a Lay it on the ground (For longer ones)
Fig. 3-10b Hang it on the cross member (For
shorter ones)

Wrong
Fig. 3-10c directly tilt it down on the ground
*Note: Prevent the laser module on the wheel clamp from contacting with the ground