X-431 ADAS PRO Calibration Tool User Manual
26
4. Take out the beam lifter from the package box, gently attach it on the base support,
with the mounting holes on the beam lifter aligning with ones on the base support.
Use the screws to tighten it on the base support.
Fig. 4-3
5. Recover the upper cover on the base support (the part integrated with name plate
should be installed onto the other part) and tighten the screws to secure it on the
fixing baffle.
6. Choose the desired power adaptor. Insert one end of the power adaptor into the
DC-IN port of the beam lifter, and the other end to the AC outlet.
Fig. 4-4
To Next Page
Loading...
