LAUNCH X-431 ADAS PRO Calibration Tool User Manual
37
the calibration panel to the vehicle)
Distance E = reserved for about 1m (from the vehicle to other obstacles)
Distance F = at least 0.5m (a lane for technician to walk through)
5.1.1.2 For rear & AVM cameras
For calibrating the rear & AVM camera, the whole workstation size depends on the
vehicle size and the calibration reference pattern. The following illustration describes
the maximus workstation size for reference only.
For American vehicles,
Distance A = about 7.3m (the width of the whole workstation)
Distance B = about 12m (the length of the whole workstation)
Distance C = at least 0.5m (a lane for technician to walk through)
Distance D = about 1.7m (the width of the calibration reference pattern. It varies from
vehicle to vehicle)
To Next Page
Loading...
