Launch X-431 PRO Series - Change Password; Settings; Units of Measurement; Print Information

LAUNCH X-431 PRO Series User Manual
61
software.
9.8 Change password
This item allows you to modify your login password.
9.9 Settings
It enables you to make some application settings and view software version
information etc.
9.9.1 Units of Measurement
It is designed to configure the measurement unit. Metric System and English
System are available.
9.9.2 Print Information
This option lets you define your print information. It mainly includes Workshop,
Address, Telephone, Fax and License Plate.
Fig. 9-7
After inputting, tap “Save”.
Once you saved the print information, it will be entered automatically in the “Add
Information” box every time you save the diagnostic report.
9.9.3 Launch Printer Set
This option is designed to establish a wireless connection between the tablet
and the Wi-Fi printer (sold separately) while performing printing operations.
Follow the steps below to connect the printer.
1. Tap “Launch Printer Set”.