Leadshine CS2RS-D503 - Check of Product; Arrival Inspection; Nameplate Information; Part Number

CS2RS Series Modbus RS485 Closed Loop Stepper Drive User Manual
- 3 -
1.4 Check of Product
1.4.1 Arrival inspection

Check whether the surface of the product is damaged or not during transportation.
 Check the nameplate models of the drive and motor are what you have ordered.

Cheek if it is fully equipped with accessories. Accessories include power supply and I/O signals
connector.
1.4.2 Nameplate information
1.4.3 Part number
 Neither the damaged nor missing accessories of stepper system
is allowed to install.
 Contact Leadshine or local distributor if any failure was found.