USER’S MANUAL
OBDII Auto Scanner
12
Press [UP] or [DOWN] to select ON/OFF and press [ENTER] to confirm.
4). Record: ON/OFF the Record.
Choose [Record More] and press [ENTER], the screen will display the
interface as shown below:
con.
Record More
ON
con.
Unit of measure
Flow lb/min
Speed mph
Distance miles
Pressure 1 psi
Pressure 2 inHg
Pressure 3 inH20
Pressure 4 inH20
Press [UP] or [DOWN] to select it and press [LEFT] and [RIGHT] to
change, then press [ENTER] to confirm.
3). Beeper: ON/OFF the Beeper.
Choose [Beep] and press [ENTER], the screen will display the interface as
shown below:
con.
Beeper
ON
To Next Page
Loading...