USER’S MANUAL
OBDII Auto Scanner
11
You can press [UP] [DOWN] key to select any language and press [ENTER]
to confirm. The system will convert to the chosen language interface at
once.
2). Unit of measure.
Choose [Unit of measure] and press [ENTER], the screen will display the
interface as shown below:
con.
Tool Setup
Language
Unit of measure
Beeper
Record mode
to make the following adjustments, settings:
1). Select language: Selects desired language.
Choose [Language] and press [ENTER], the screen will display the
interface as shown below:
con.
Language
English
3.5 Tool Setup
Select [Tool Setup] in the Main Menu and press [ENTER], the screen will
display the interface as shown below:
To Next Page
Loading...