Leagend T86 - Diagnostic; Read Codes

USER’S MANUAL
OBDII Auto Scanner
15
According to the above figure to select different item by pressing [UP] or
[DOWN] and press [ENTER] to confirm.
con.
Read Codes
Current DTCs ($03)
Pending DTCs($07)
Permanent DTCs($0A)
4.2.1 Read Codes
Select [Read Codes] and press [ENTER] in Diagnostic Menu. If there are
some codes, the screen will display the codes as shown below:
con.
Current DTC
P0143 1/3
O2 Sensor Circuit Low Voltage Bank 1 Sensor
3
con.
Di agnostic Menu
Read codes
Erase codes
I/M readiness
Data stream
Freeze frame
O2 sensor test
On-Board monitoring
EVAP system test