USER’S MANUAL
OBDII Auto Scanner
24
4.2.8 EVAP System Test
The EVAP test function lets you initiate a leak test for the vehicle system.
The AUTO SCANNER does not perform the leak test, but signals to
vehicle function, refer to the vehicle procedures necessary to stop the test.
Press [ESC] to return to Diagnostic Menu.
You can use [UP] [DOWN] button to select an item and press [ENTER],
the screen will display as shown below:
con.
O n-Board Monitoring
Test $02 date
Test $03 date
Test $05 date
Test $08 date
Test $09 date
Test $0B date
Test $0C date
Test $12 date
con.
Test $02 Data
1/2
Component ID $5e
Limit type Max
Test value 33733
Minimum limit -----
Maximum limit 39982
Status Pass
To Next Page
Loading...