USER’S MANUAL
OBDII Auto Scanner
16
Press [ENTER] to erase DTC shown below:
According to the above figure to press [ENTER] and the screen will display
the interface as shown on the next page:
con.
Erase DTC
Clear / Reset Emission-Related
Diagnostic Information, Are you sure?
4.2.2 Erase Codes
Select [Erase Codes], the screen will display the interface as shown
below:
1/3 indicates there are 3 codes total and now P0143 is the first code to
display.
The screen will also show the content of the code below the number of
code.
You can use [ESC]key to view the next code.
After viewing all the codes, you can press [ESC] to return to the Diagnostic
Menu.
con.
Erase DTC
Please turn ignition ON with Engine
Off, press ENTER key to continue!
To Next Page
Loading...