Before the product is used for the first time
it is recommended to charge the battery
(a) fully for at least 12 hours. To charge the
battery, plug the adaptor into the mains
socket, attach the lead to the frame and
switch on the mains power. While charging
the charger LED will remain orange and
will turn to green when fully charged. When
charged switch off mains power, remove the
adaptor plug when and disconnect the lead
from the frame. The battery charge should be
topped up each day for approximately one
hour.
Before transferring the child into the stander
carry out the daily product inspection as
outlined in section 12 of this user manual.
We would recommend that users are never
transferred straight from seating to standing
without preparation and stretching. This is
best done in lying position whilst on a mat
but can be carried out in a wheelchair or
seating system if required.
Before transferring the child into the product
lock all the castors, ensuring that they
are facing outwards to maximise product
stability. Make sure the straps on the flexible
laterals supports, the pelvic band and
sandals are released and out of the way
to facilitate transfer.
Always secure the pelvic band or
flexible hip pads first and then the flexible
lateral supports.
10.1 Transferring the user
into and out of the stander
10.2 Charging the battery