LEGRAND neat PIR II - Mounting Bracket

10 PIR II User manual - NE41 19003-00 v1.2
4.3.2 Horizontal detection area
1 m 2 m 3 m 4 m
5 m 6 m 7 m
- 45°
+45°
Picture 7. Approximate horizontal detection area.
4.4 Mounting bracket
The mounting bracket is normally used when PIR II
is used as a Door alarm to place the unit on a door
blade, see „6 IDA (Intelligent Door Alarm)“.
Picture 8. Mounting bracket.
The screws must be 3.5- 3.7 mm wide and at least 30
mm long and the head must not exceed 2 mm in height.